LED modules LLE ADV6

The 6th generation of these linear modules has been expanded. In addition to the non-SELV products already released, there are now SELV versions in CRI > 80 or CRI > 90, high-voltage versions with up to 2,000 lumens and extra-long modules up to 1,400 millimetres. The entire product family offers excellent efficacy and high homogeneity (MacAdam 3) and can be combined with different lenses and covers, making this series ideally equipped for specific tasks.
More...

LV – Low Voltage:

• High efficacy up to 203 lm/W (tp = 25 °C)
• Luminous flux: 650 lm, 1,250 lm
• Colour temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K, 6,500 K (CRI 80)
• Plug-in terminals for quick and simple wiring from module to module
• Delivered in plastic-free, sustainable packaging

HV – High Voltage:

• Luminous flux: 2,000 lm
• Colour temperatures: 2,700 K, 3,000 K, 4,000 K, 5,000 K, 6,500 K
• Plug-in terminals for quick and simple wiring from module to module
• Delivered in plastic-free, sustainable packaging

HV – Long boards:

• Module size: 24 x 1,120 mm and 24 x 1,400 mm
• Luminous flux: 650 lm, 1,250 lm, 2,000 lm
• Colour temperatures: 3,000 K, 3,500 K, 4,000 K
• Plug-in terminals for quick and simple wiring from module to module

LED modules SLE ADV8

The latest generation of SLE modules offers both improved efficacy and a longer service life. The small LES04 and LES06 modules are suitable for creating miniaturised spotlights and downlights. The larger versions (LES17 and LES21 Raw) have PCB sizes that are optimised for combining with the standard housings available on the market. 
More...

At a glance:

• Efficacy up to 188 lm/W
• Module sizes: LES04, LES06, LES09, LES13, LES15, LES17 and LES21
• Colour temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K
• SDCM2 for LES9 and LES15
• Very good thermal management thanks to COB technology
• TIM versions for quick and easy assembly
• Lifetime of up to 60,000 hours

LED drivers LC 24 V SC SNC2

The compact constant voltage LED driver now consumes less than 0.5 W at no load. It therefore complies with the current European ecodesign guidelines, allowing Tridonic drivers to be connected to a dimmer or switch on the output side if the application requires it.
The driver is mainly used in decorative applications such as cove or accent lighting in combination with the 24 V LLE FLEX LED strip. 
More...

At a glance:

• 24 V constant voltage driver
• Output power: 35 W, 60 W, 100 W, 200 W in the SC form factor for independent use
• No-load power <0.5 W
• Dimmable via external PWM LED dimmer according to ecodesign guidelines

ECCO Smart 2D-TR

We have created a minor revolution in driver programming by developing a simple way to adjust the current on an NFC driver during production.

With the handy ECCO Smart 2D-TR scanner you can read QR codes and transfer them to the drivers via NFC. These QR codes contain all the necessary information relating to the current. The advantage is that only one QR code is required per current and can be reused any number of times. 
More...

At a glance:

• Simplified storage: no need to have different resistances in stock
• Cost savings: no need to buy resistors
• Robust hardware: many years of proven service in tough production environments

DALI-2 Touchpanel 8P DA2

The new touch panel can be easily integrated in existing DALI-2 light management systems such as sceneCOM S and sceneCOM evo. The eight buttons are freely configurable and offer sufficient scope for individual control functions. The touch panel is available in a black (BK) or white (WH) housing and is compatible with all DALI-2 devices.
More...

At a glance:

• Capacitive DALI-2 Touchpanel with 8 freely programmable touch buttons
• Can be combined with DALI-2 compatible controllers
• Multi-master compatible: Multiple control modules are possible in a DALI system
• Power supply via DALI line

MSensor G3 PIR 4DPI WDA

The DALI-2 certified PIR sensor with a wide detection angle (WDA) offers ambient light and presence detection and is now also available as a stand-alone version. It also has a new housing for easy mounting and fixing on ceilings. The wide detection range means that the sensors can be mounted at large intervals.

The Tridonic MSensor G3 family of sensors complies with the DALI-2 standard. An application controller is needed to use the sensors in such installations.
More...

At a glance:

• PIR sensor for low-bay applications such as offices
• Luminaire installation (SFI), recessed ceiling installation (SRC), ceiling surface mounting (SSM)
• Mounting height: 2 to 4 m

basicDIM ILD G2 4DPI WDA

This DALI-2 certified PIR sensor offers ambient light and presence detection and also features a wide detection angle (WDA) plus all the benefits of our new MSensor.
The necessary application controller is integrated in this product.
More...

At a glance:

• For up to 64 DALI drivers, expandable with DALI-2 input devices
• Infrared remote control for configuration and operation
• Up to 8 MSensor G3 PIR 4DPI WDA units can be connected to an ILD G2 to extend the motion detection range
• Flexible configuration via companionSUITE
• Luminaire installation (SFI), recessed ceiling installation (SRC), ceiling surface mounting (SSM)
• Mounting height: 2 to 4 m

LED drivers LCO one4all NFC C EXC3 (700–1,500 mA extension)

The series of drivers for outdoor applications has been extended. The new versions have an even higher output current of up to 1,500 mA which can be adjusted via NFC or DALI. They have a wide dimming range, excellent efficiency and a long service life.
More...

At a glance:

• Dimming range: 5 to 100 %
• Up to 93 % efficiency
• Output power: 60 W, 135 W, 200 W
• Nominal lifetime of 100,000 h