Highlights - Winter 2021 issue
►Download

Module LLE FLEX 24 V Tunable White PRE

_ Flexible 24-volt constant-voltage LED strip
_ Efficacy up to 100 lm/W
_ Module size: 8 x 5,000 mm
_ Colour temperature: Tunable White (2,700 to 6,500 K)
_ Luminous flux variants: 1,300 lm, 2,000 lm, 3,000 lm
_ Manufactured in Austria using the reel2reel process

The product group of the flexible LED strip with 24-volt constant voltage has been expanded to include a Tunable White variant. This caters for all colour temperatures between 2,700 and 6,500 Kelvin, which can be individually adjusted if required. Paired with the homogeneous light created by the low pitch distances, the premium module (PRE) provides the ideal basis for high-quality lighting solutions. With the option of cutting every 75 millimeters, the right length is always available. ►more...

ACU SRL Connection Box 3-POL / 5-POL

_ Strain-relief connection box with pre-installed cable for connecting a driver
_ For 3-POL or 5-POL LINECT connectors
_ LINECT interface for all common cable suppliers on the market (one size fits all)
_ New plug type for tool-free strain-relief for stranded and solid wires

The connection box with LINECT interface has been specially developed for independent luminaires with the LINECT connector system and helps make installation simple and quick. Added to this is an optimized strain-relief concept that enables the mains connection to be made without tools and supports loop-through cables for all common luminaire types. 
►more...

Sensor smartSWITCH SFI 10 HF 5DP basicDIM Wireless

_ Motion detector HF for luminaire installation (master)
_ Forms automatically a wireless Bluetooth mesh network with up to 250 nodes (basicDIM Wireless /Casambi)
_ Works without an external gateway
_ The HF sensor detects movement through glass and thin materials
_ Delay time, detection range and light value for the bright-out function can be set as required via the 4remoteBT app
_ For heights of up to 5 meters
_ smartSWITCH bDW can also be used as a wireless relay

With the help of an HF motion sensor for basicDIM Wireless systems, the lighting can be switched on and off automatically depending on motion detection in combination with the daylight level. smartSWITCH bDW is normally mounted in a master luminaire that you easily add to your bluetooth mesh network (basicDIM Wireless / Casambi) with up to 250 nodes, some of which can be selected to be controlled as wireless slave luminaires.
smartSWITCH bDW has a built-in relay that can turn the master luminaire on and off. The relay is controlled by the HF sensor or as a wireless relay * in the Bluetooth mesh network.

Upon delivery, the profile with HF sensor and Bright-Out function is activated. This means that during motion detection, the Bright-Out function will prevent the relay from switching on the lighting if the ambient light is sufficient, to reduce energy use.

Light level selection to activate Bright-Out, delay time and detection range can be easily set in the 4remoteBT app. smartSWITCH bDW can be installed at a height of up to 5 meters and detects movements through glass and thin materials.

*smartSWITCH bDW can also be used as a wireless relay by changing the device's profile in the app 4Remote BT to "Only Relay" function (then the HF sensor is deactivated). smartSWITCH bDW as a wireless relay can be mounted in a plastic enclosure on the wall or in the suspended ceiling. Just make sure the device is connected to the Bluetooth mesh network. The built-in relay can take resistive loads of <800W and capacitive loads of <400 VA, see data sheet. 
►more...