► Retail & Hospitality 
Driver LC 20/27/45 W NF EXC3

► Office & Education & Industry
Driver LC stepDIM lp SNC

► Outdoor
Module RLE AMB EXC2

► Lighting Controls
basicDIM Wireless G2
sceneCOM evo DA2

► Think ahead
Automated checks for EM lighting

Driver LC 20/27/45 W NF SR EXC3

_ Efficiency up to 86%
_ 20 W version with compact Speedy housing
_ NFC interface for multiprogramming via companionSUITE
_ Wide operating range with secondary current 100 to 1,050 mA

All remote mounting devices in the excite series (EXC) are now equipped with NFC interfaces that enable very simple configuration via companionSUITE and flexible adjustment of the output current. Especially the 20 W version in the compact Speedy housing is perfect for use in small downlight luminaires. The LED driver is available as both On/Off non-dimmable and DALI-2 dimmable which is compatible with all DALI-2-based control units. ►more...

Driver LC 25/35/50/65 W stepDIM lp SNC

_ A product consisting of constant current LED driver, daylight and motion sensors
_Efficiency up to 87 %
_ stepDIM function for dimming from 100 % to 30 %

Combined solution based on LED driver, sensor and stepDIM function to lower the lighting to a minimum level when light is not needed. By dimming the light level, energy use is reduced, but it does not become completely dark. Thus, this solution is perfect for, for example, lighting in parking garages. 
►more...

Module RLE AMB excite Serie (EXC2), generation 2

_ Suitable for harsh outdoor conditions
_ Insect-friendly light spectrum
_ Tested for salt spray and harmful gas
_ For use with standard 2x2 lenses (e.g. from LEDiL)
_ Life of 100,000 hours and 8-year guarantee
_ Wide temperature range of -40 to +100 °C

The high-efficiency LED modules (Road Light Engine) for outdoor lighting have now been expanded with a variant with the Amber colour temperature. The warm light of 1800 Kelvin is perfect for decorative lighting, for example in historic city centers, and provides better visibility in fog thanks to greatly reduced glare. ►more...

basicDIM Wireless Generation 2 control technology

basicDIM Wireless module G2
_ Active module with 10mA DALI power supply
_ With the mobile app, a wireless mesh network with up to 250 nodes is easily created
_ Wireless control with Android / iOS device
_ 1x independent pushbutton input
_ Available in version with strain relief

basicDIM Wireless passive module G2
_ Passive module connected to DALI circuit with power supply from po4a LED driver PRE or separate DALI power supply
_ DALI-2 sensor can be connected and thus include and control luminaires in the bluetooth mesh network
_ 4x independent pushbutton inputs

basicDIM Wireless SR
_ Active module with 50 mA DALI power supply for controlling up to 25 DALI ballasts as one light group
_ 1x independent pushbutton input
_ Can be mounted in luminaire or casing supplemented with strain relief for mounting above suspended ceilings

Tridonic is now introducing the second generation of basicDIM Wireless modules G2 in a new compact housing that can be easily integrated into narrow luminaires or device boxes. basicDIM Wireless is now offered in 3 different designs. The active version now has an integrated DALI power supply of 10 mA and a separate input for 1x pushbutton and is available in a casing with a strain relief. The passive module is fed through the connection to the DALI bus and has 4x separate inputs for pushbuttons. The third module is active with an integrated DALI power supply of 50 mA in a SR housing with strain relief to control up to 25 LED ballasts and has a seperate input for 1x pushbutton. All three modules can be configured with different profiles with app 4Remote BT.

The entire basicDIM wireless product portfolio from Tridonic is fully compatible with Casambi. ►more...

sceneCOM evo DA2

Application Controller sceneCOM evo DA2
_ DALI-2 Certified Single Master Application Controller
_ Independent lighting control for up to 192 DALI units & 192 input units in 3 DALI circuits
_ Up to 5 sceneCOM evo can be connected via local network to control up to 960 addresses
_ Extended functionality via software licenses so you pay for what you need
_ DALI emergency lighting: Test planning and monitoring

We are now introducing the new generation of DALI-2 Application Controller for lighting control of larger applications. sceneCOM evo is a DIN-mounted unit with 3 built-in DALI power supplies. You can thus control up to 3x 64 = 192 DALI drivers and you can also connect 192 input devices (DALI-2 sensors / pushbuttons). sceneCOM evo connects to the local network and it has a built-in web server that you can easily connect to with Google Chrome in a tablet or laptop. The user interface is structured like a standard APP for touch screen and is easy to use to control the light with fixed scenes or dynamically over time and adjust the programming.
With the new software in sceneCOM evo, you can connect up to 5 Application Controllers within the local network and thus control 5x 192 = 960 DALI ballasts and 960 input units (DALI-2 sensors / pushbuttons). ►more...

sceneCOM and basicDIM Wireless G2

sceneCOM evo DA2 Application Controller
_ Built-in software for commissioning and lighting control of white light, presence detection, daylight compensation, Tunable white, RGB and emergency light testing and monitoring.
_ Can control lighting via wired DALI-2
_ Can control lighting wirelessly via basicDIM wireless DALI gateway

basicDIM Wireless Passive with profile DALI-gateway
_ Signal converter from DALI-based lighting control to wireless bluetooth mesh network
_ Translates between Bluetooth and DALI
_ Included as a node in the bluetooth mesh network

The DALI-2-based sceneCOM evo and the wireless technology basicDIM Wireless from Tridonic now form a perfect team for both wired and wireless lighting control.
With the help of a special system improvement, sceneCOM evo can control wireless luminaires by connecting a basicDIM Wireless module with profile DALI gateway. The new DALI gateway handles communication between sceneCOM evo and basicDIM Wireless mesh networks. In this way, existing DALI wired systems can be upgraded with sceneCOM evo and expanded and modernized in a fast and cost-effective way with the wireless technology basicDIM wireless. Wireless emergency light fixtures can also be integrated in a DALI system and then monitored centrally by sceneCOM evo. ►more...