Module LLE FLEX 48 V EXC

_ Dimmable 48 V constant voltage LED strip for use on aluminium profiles and for decorative applications such as cove or accent lighting
_ Width 8mm for 600 / 1200 / 1800 / 2500 lm/m and 12mm for 3000 / 4000 lm/m
_ Can be cut every 6.25 cm for great freedom of design
_ Module efficiency up to 163 lm/W
_ Colour rendering: CRI > 80, on request CRI > 90
_ Self-adhesive 3M adhesive tape on the back for easy mounting on different surfaces
_ Lifetime of up to 60.000 hours

Thanks to the 48 V constant voltage, the new LED strip can provide lighting solutions twice as long as the 24 V version – and with constant high luminous flux. The fact that it can be cut every 6.25 cm offers enormous freedom of design. The module is supplied in 8 mm or 12 mm width, depending on the lumens per metre required, and offers a colour rendering of CRI 80 or, on request, CRI 90. The self-adhesive 3M tape on the back means it can be easily mounted on different surfaces. ►more...

Drivers LC 35 W / 60 W / 100 W / 48 V o4a NF EXC

_ Dimmable, DALI-2 certified driver series for cove, facade, accent and indirect ceiling lighting
_ Ideal in conjunction with the flexible LLE FLEX 48 V EXC LED strip from Tridonic
_ Available in Stretched Compact and Low Profile versions with a height of 21 (or 16 mm in 35 W)
_ Dimming range: 1 – 100 %
_ one4all interface (DALI-2, DSI, switchDIM, corridorFUNCTION)
_ fade2zero function
_ Simple configuration via NFC interface 
_ lumDATA (luminaire data, energy report, diagnostics and maintenance)

The new 48 V dimmable driver series is the perfect complement for the 48 V LED strip. It is available with a Stretched Compact or Low Profile housing, and in the 35 W version in an extra slim version height of only 16 mm. Thanks to the optional snap-on strain relief, the Stretched Compact driver can be either installed in the luminaire or used as a separate driver. New is the NFC interface for fast and easy programming. With lumDATA, it also meets the latest DALI-2 specifications for storing and sharing various data. 
►more...

Drivers LC 25 / 35 / 50 / 65 W flexC lp SNC4

_ Constant-current LED driver for luminaire installation
_ For luminaires of protection class I
_ Efficiency of up to 93.5 %
_ Ambient temperature ta (for a life of 50,000 h) 60 °C
_ Thermal protection to EN 61347-2-13 C5e
_ Selectable fixed output current
_ Nominal life of up to 50,000 hours

The essence driver (SNC4) for damp-proof luminaires combines good efficiency and long life with an excellent price-performance ratio. The fourth generation of the constant current driver offers optimised thermal performance and requires little space in the luminaire thanks to its slim, linear design. It is therefore ideal for minimalist luminaires. 
►more...

SIDEREA groupCONTROL

_ Programmer for on-site commissioning
_ Control from a smartphone, tablet or laptop via a web app (configTOOL)
_ Local autonomous group management via RF mesh
_ Luminaire groups, small installations up to 60 nodes
_ Standard-based solution (ZD4i)
_ Autonomous networked lighting, installable without the use of network experts

Within SIDEREA, Tridonics outdoor lighting range, Tridonic introduces a Programmer and a Control unit that uses smart technology.
The groupCONTROL Programmer offers simple, local group management of small outdoor installations with up to 60 light points. The programmer is used to commission the new node Multi Master Controller CIS 30 DA2 RF, the worldwide first Zhaga-D4i certified control unit for monitoring and controlling luminaires. The control unit (node) is mounted on the luminaire via a Zhaga socket. The unit is available in two versions, with or without GPS signal. At least 1 control unit with GPS signal is required per group control. If you only use the GPS version on all luminaires within the group, commissioning is simplified as each luminaire can easily be identified on the map in APP in your smartphone or tablet. The control unit has an integrated sensor for ambient light measurement. This unit can also control up to 8 DALI DT6 channels and one additional motion sensor Zhaga D4i to enable dynamic and adaptive lighting.

Both components form the SIDEREA groupCONTROL system. By integrating sensors, schedules and lighting scenes it is possible to create a tailor-made system that can be seamlessly expanded into an IoT-based Smart City solution thanks to compliance with the Zhaga Book 18 Standard and D4i certification. A gateway then connects the system to the cloud. ►more...